fr. 09:00 to 18:00 M-F

+38(063)-20-777-39

Connector UA SNP1

Type of product: Low frequency electrical connectors

Company: OJSC Ltava

Connectors electric low-frequency rectangular type UA SNP1

Designation
Connector UA SNP1- (kK; mM; nN; lL (Lk)) G (W) -P (Op) (…) VKSHU.434415.001 TU, where
UA – Ukraine;
SNP – low-frequency rectangular connector;
1 – serial number of the development;
(kK; mM; nN; lL (Lk)) – the composition of the connector and the total number of elements:
to – the number of contacts (2 … 60); K – contact symbol;
m is the number of mounting holes in the insulator; M is the symbol of the mounting hole;
n is the number of free holes in the insulator (without contact);
H – a symbol of an unspecified contact or a hole on a socket provided for under a catcher;
l is the number of catchers; L is the symbol of the catcher; Lk – catcher symbol with a threaded element;
Г (Ш) – type of contact: Г – socket, Ш – pin;
P (Op) – type of contact shank:
P – shank for mounting in the hole of the printed circuit board;
Op – shank for volumetric installation;
(…) – the number of connector elements and their alternation (connector diagram):
(kK; mM; nN; lL (Lk) + kK; mM; nN; lL (Lk) + … + kK; mM; nN; lL (Lk));
VKSHU.434415.001 TU – designation of technical conditions.
Type of climatic modification – B2.1 according to GOST 15150-69.

terms of Use
Sinusoidal vibration:
frequency range, Hz 5 – 80
acceleration m / s2 (g) 70 (7)
frequency range, Hz 80 – 600
acceleration m / s2 (g) 200 (20)
frequency range, Hz 600 – 3000
acceleration m / s2 (g) 300 (30)
Repeated mechanical shock:
peak shock acceleration, m / s2 (g) 400 (40)
Mechanical shock single action:
peak shock acceleration, m / s2 (g) 1500 (150)
The increased relative humidity at a temperature of 35 ° C,% 98
Atmospheric reduced pressure:
working, Pa (mmHg) 1.33 · 10-3 (1 · 10-7) limit, kPa (mmHg) 19.4 (145)
Ambient temperature, ° С:
increased working 85
reduced working minus 60
Change of medium temperature, ° С from 105 to minus 60
Mold mushrooms, salt fog
Maximum cross-sectional area of ​​wires connected to shanks
socket contacts, mm2, not more than 0.35

Specifications
Current strength per contact, A, not more than 1
Voltage, V (amp), no more than 80
Test voltage, V (amp) 500
Contact resistance, Ohm, no more than 0.01
Capacitance between any adjacent contacts, pF, not more than 3
Insulation resistance, MΩ, not less than 1000
The force of dismemberment of contacts with a control caliber, N (kgf), not less than 0.2 (0.02)
Number of articulations-dissections 250
Operating hours of connectors, h 5000
Gamma-percent shelf life at = 99.5%, years 12

Contacts